Products

TK5-K6 PU Timing Belts

Yonghangbelt TK5-K6 PU Timing Belts
In order to optimize the alignment /guidance timing belts can be equipped with tracking guides in several dimensions. After having grinded a groove into the tooth side the tracking guide will be placed and welded into that same groove. Apart from that method there are also belts available with an extruded guide: here the guide and belt are produced in one single process and form a coherent piece.

GET A QUOTE

Introduction

Introduction

PU Timing Belts TK5-K6

TK5-K6 PU Timing Belts factory

Product details Timing belt TK5-K6
Colour	White
Shore hardness (A)	90° Shore A
Cords	steel/ kevlar
Width	5-400mm
Length	Open length
	Endless with joint
	Seamless (moulded)
Working temperature	-20-+80C
Standard cords	steel 0.6 mm
Width tollerance	+/- 0.5 mm
Height tollerance	+/- 0.3 mm
Length tollerance	+/- 0.8 mm
Weight per meter	+/- 20 g/10 mm riem breedte
Minimum diameter pulley	40 mm
Minimum diameter counterbend	60 mm
Maximum load (N)	Open	Endless with joint
10mm Maximum load (N)	520	260
50mm Maximum load (N)	3410	1705
100mm Maximum load (N)	6900	3450