How to care for and maintain Extrusion Cutter Pillar Belt on a daily basis

Jan.20.2025

1. Periodic inspection of Extrusion Cutter Pillar Belt for wear and tear

Visual inspection: Periodically inspect the surface of the Extrusion Cutter Pillar Belt for wear, cracks, deformation or deterioration. Pay special attention to whether the groove part is even and the depth is consistent to avoid excessive wear leading to failure.

Crack Detection: Inspect the Extrusion Cutter Pillar Belt for cracks or other damage to the joints, corners and other vulnerable areas.

Compare Before and After Condition: If the Extrusion Cutter Pillar Belt's length has changed or there are visible signs of rubbing, the Extrusion Cutter Pillar Belt may be excessively worn or improperly tensioned.

2. Maintain proper tension

The Extrusion Cutter Pillar Belt needs to be maintained at the proper tension. Too much tension can lead to excessive wear or breakage of the Extrusion Cutter Pillar Belt, while too little tension can lead to slippage and ineffective power transfer.

Periodically check that the tensioning device (e.g. tensioner pulley) is working properly and make necessary adjustments.

3. Clean Extrusion Cutter Pillar Belt

Remove foreign objects: Make sure that there are no foreign objects, oil or impurities on the surface of the Extrusion Cutter Pillar Belt, especially the grooves are prone to accumulate dust or small particles, which will affect the friction and use of the Extrusion Cutter Pillar Belt.

Cleaning: The surface of the Extrusion Cutter Pillar Belt can be cleaned with a clean cloth or soft bristle brush. If necessary, a mild detergent can be used, but avoid using strong acid and alkali detergents that may damage the Extrusion Cutter Pillar Belt material.

4. Check the traction sheaves and pulleys

The Extrusion Cutter Pillar Belt's mating parts (e.g., traction wheels, pulleys, etc.) also need to be inspected periodically to ensure that they are not excessively worn or damaged. Check that the friction surfaces of the wheel bodies are smooth and even to ensure that the Extrusion Cutter Pillar Belt is able to operate consistently.

Ensure the alignment of the traction wheels to avoid deflection or side wear of the Extrusion Cutter Pillar Belt during operation.

5. Lubrication System Inspection

Some Extrusion Cutter Pillar Belts may require lubrication to minimize friction and wear. Check that the lubrication system is working properly and make sure the oil or grease has not dried out.

Use the proper lubricant to avoid excessive friction between the tow strap and fittings and to prolong their life.

6. Avoid overloading

Ensure that the Extrusion Cutter Pillar Belt is not operating above its rated load. Overloading can increase wear and deterioration of the Extrusion Cutter Pillar Belt and may even lead to breakage. When using the equipment, monitor the load regularly to ensure that the equipment is operating properly and within the designed operating range.

>>Click "YONGHANG®Extrusion Cutter Pillar Belts " for more information about our products!

YONGHANG® Transmission Belt With more than 20 years of rich experience in the industry, The Company integrates research and development, production and customization, ODM&OEM Service, CE RoHs FDA ISO9001 Certification, R&d Centers, with more than 10,000m²+ factory, Molds More than 50+ sets of precision equipment, More than 8000+ sets of Molds, professional technical research and development team, precision manufacturing, providing one-stop high-quality transmission products customization service! Welcome to www.yonghangbelt.com for more information! Article copyright: YONGHANG® Transmission Belt, please specify the source, thank you for your cooperation!

图文官网结尾(4d053057a5).jpg