Products

D8M-DL PU Timing Belt

Double-toothed belts are used for drives with axles that rotate in opposite directions. The D8M PU timing belt is standard delivered with steel or kevlar cords. The D8M PU toothed belt has a pitch of 8mm , extremely suitable for transport where good positioning is required. We can customize the D8M PU toothed belt according to your wishes.Model DA Symmetrical arrangement of the two-side teeth;Model DB Staggered arrangement of the two-side teeth.

GET A QUOTE

Introduction

Introduction

D8M-DL PU Timing Belt

Product details Timing belt D8M
Colour	white/ transparent/black
Shore hardness (A)	90° Shore A
Cords	steel/ kevlar
Width	5-400mm
Length	Open length
	Endless with joint
	Seamless (moulded)
Working temperature	-20-+80C
Standard cords	steel 0.9 mm
Width tollerance	+/- 0.5 mm
Height tollerance	+/- 0.3 mm
Length tollerance	+/- 0.8 mm
Weight per meter	+/- 69g/10mm belt width per meter
Minimum diameter pulley	44.47mm
Minimum diameter counterbend	90 mm
Maximum load (N)	Open	Endless with joint
10mm Maximum load (N)	1350	675
50mm Maximum load (N)	7210	3605
100mm Maximum load (N)	14650	7325