Timing belts joints

2022-09-26

1:Endless with joints The standard PU timing belts are made endless by using a finger joint.2:Seamless (moulded) For drives and heavy transport a truly endless timing belt is often used.One piece with moulding, seamless and without joints .3:Pin Join The timing belt joint PIN-JOIN is designed for a singular connection of timing belts directly into the application on site.


Endless with joints

The standard PU timing belts are made endless by using a finger joint..

This joint has about 50% of the strength compared to a truly endless (flex/moulded) timing belt but is used for almost all transport solutions.

齿接图.png


Seamless (moulded)

For drives and heavy transport a truly endless timing belt is often used.One piece with moulding, seamless and without joints .

These belts are available in the most standard lengths and are stock items.

If longer then 1500 mm the belts will be produced especially on length (flex belts) and are deliverable up to a maximum length of 20.000 mm – always a multiple of the tooth type.

无缝.jpg

Pin Join 

The timing belt joint PIN-JOIN is designed for a singular connection of timing belts directly into the application on site.

The Pin Join timing belt can be fitted as a quick assembly when required, with this system a toothed belt can be changed within 15 minutes.

This connection is also possible for all common types of belt including double sided toothed belts.

The Pin Join timing belt can also be used to Join belts with coatings and cleats.

The maximum load is 50% of the maximum load of an endless welded belt. However, it is also possible to produce an extended Pin Join connector, should the belt be subjected to heavier loads.

image.png


未标题-1_04.jpg